100% Virgin Molded and Extruded PTFE Rod

• Customization: Available
• Material: PTFE
• Kind: Plastic Bar
• Purity: 100% Virgin
• Method: Molded,Extruded
• Temperature: -180 - + 260 ºC
• Density: 2.1-2.3G/Cm3
• Diameter: 3mm-120mm
• Color: White and Optional
• Ndustry Experience: More Than 10 Years
• Transport Package: Inner Plastic Bag, Outside Carton, Wooden Case, or
• Trademark: RILSON
• Origin: China
• Production Capacity: 100 Ton/Tons Per Month

Product Description

PTFE Rods has the lowest coefficient of friction than almost any material. it can efficiently work at the temperature -180ºC- +260 ºC. So it is an ideal element for the food industry. It consists of the best dielectric property. Due to this property, the rods are used in electrical and electronics industries.

There are two kinds of PTFE rods to offer. One is manufactured by paste extruded method in the diameter from 4mm to 9mm and and the other is made by ram extruded method is from 10mm to 50mm; rods over the diameter 50mm are manufactured by moulded

 

Specifications

1. Superior endurance in corrosion 
2. Superior endurance in seasonal change 
3. Non-flammable, limited oxygen index is under 90. 
4. Low friction coefficient 
5. Non-viscous 
6. Superior endurance in high&low temperature, can be used -180~260. 
7.High electricity insulation 
8. High electricity resistance coefficient 
9. Self-lubricating 
10. Atmospheric aging resistance 
11. Radiation-resistant properties and low permeability 
 

Property	Unit	Pure PTFE Result
Tensile strength	MPa	≥30
Ultimate strength	%	250
Apparent density	g/cm3	2.1-2.3
Dialectic strength	KV/mm	10
Resistance of surface (woring voltage 500v)	Ω	3.7*106