Customization: | Available |
---|---|
Standard: | Standard or as The Customer′s Request |
Material: | PTFE |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Abrasion Resistant Aramid packing
Aramid fiber packing braided from high quality Dupont aramid and kevlar fiber with PTFE impregnated and lubricant additive.It is wear resistant but may damage the shaft is not used properly. Compared with other kinds of packing, it can resist more severe media and higher pressure. The packing is also lubricated with a silicone-based compound for quick and easy break-in.
Abrasion Resistant Aramid Fiber Packing/Abrasion Resistant Aramid Packing
As the strength and module of Kevlar is as high as the steel-like strength. This gasket compared with other kinds of braided packing, they can resist more serve media and higher pressure. It can be installed separately or as end rings with other kinds of packing to combine different characteristics into seals packing ring set.
Abrasion Resistant Aramid Fiber Packing/Abrasion Resistant Aramid Packing Typical Application
Aramid Fiber Packing is suitable for most chemicals, water, steam, oils, solvents, abrasive sand, slurry and other gritty media.
Prime Features
1.It is wear resistant but may damage the shaft if not used properly.
2.A minimum shaft hardness of 60HRC is therefore recommended.
3.Superior performance
4.Lower frictional factor
Specifications
Density |
1.4-1.45g/cm³ |
|
PH range |
2~12 |
|
Temperature |
-180ºC~+260ºC |
|
Pressure bar |
Rotating |
70bar |
Reciprocating |
100bar |
|
Static |
100bar |
|
Shaft speed |
m/s |
20m/s |
Material: PTFE filament, graphite, lubricating oil